Product specifications

Chapter 8: WEB Management Interface Efficient Networks
®
Router family
Technical Reference Guide
Page8-64 Efficient Networks
®
Address - These parameters define the source and destination IP address
boundaries that will be applied to the firewall rules.
Source /Destination IP address - The packet must have a source (or
destination) IP address within the specified address range. If only one
address is specified, the packet must have that source (or destination) IP
address. If no source (or destination) IP address is specified, the firewall rule
matches any valid IPV4 address.
Source / Destination Mask - The firewall rule uses the specified mask when
comparing the source (or destination) IP address range with the IP address
in the IP packet. If no mask is specified, the mask used is 255.255.255.255.
Mode - Specifies when watch messages are displayed for this firewall rule. The
messages are sent to the console serial port and a Syslog server, if configured. The
options are:
Quiet stipulates no messages are displayed for this firewall rule, even if the
rule causes a packet to be dropped. This is the default setting for firewall
allow rules.
Verbose specifies a message is displayed every time this firewall rule
matches a packet, regardless of the rule action.
Direction - Specifies the direction of the packet to which the firewall rule is applied.
The direction default is both.
Firewall Rule Deletion
To delete a firewall rule, perform the following:
Step1 Click Delete on the Firewall Configuration Menu.
The following configuration form will be displayed:
Step2 Click to select the appropriate rules to delete.