Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page8-55
QoS Policy Parameters
The following parameters are used in the creation or modification of QoS policies.
Policy Name - Defines the specific policy.
Status - Enables and disables the QoS policy.
Source IP - Specifies the source IP address or range of IP addresses. Do
Not care will disable source address checking.
Dest IP - Specifies the destination IP address or range of IP addresses. Do
Not care will disable destination address checking.
Protocol - Specifies the protocol by protocol number or explicitly TCP or
UDP. Selecting Do Not Care will disable the protocol check.
Source Port - Specifies the source port or range of ports by number or
specific application. Do Not care will disable source port checking.
Dest Port - Specifies the destination port or range of ports by number or
specific application. Do Not care will disable destination port checking.
Priority - Specifies the policy priority, with normal the default value.
Code Point - incoming - Specifies or defaults the incoming code point.
Code Point - outgoing - Specifies or defaults the outgoing code point.
Bidirection - Enables (On) and disables (Off) bidirectional operation of the
policy.
Start Time - Specifies the time of day when the specified policy becomes
active.
Duration - Specifies the time period for the policy to remain active.
Repetition - Specifies the policy as a one-time, repeating, or always-on
policy.
QoS Policy Deletion
To delete a QoS policy, perform the following:
Step1 From the QoS Configuration page, click the link to display the QoS Policy
Configuration page.
Step2 Click Delete on the QoS Policy Setting Menu.