Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page8-47
SSH Configuration
To change the current SSH settings, perform the following:
NOTE:
Prior to enabling SSH, a private/public key pair should be loaded on the router.
Step1 In no key pair exists on the router, perform one of the following. If a key pair is
loaded, proceed to Step2.
• Key Generation
• Key Upload
Step2 From the SSH Configuration List page, click the Configure SSH link.
Step3 As required, configure the SSH settings:
a. Click the select the SSH mode Enable or Disable.
b. Click the select the Encryption method(s) allowed.
c. Click to select the type(s) of Message Authentication Code.
d. Define the SNMP Port Number; click to select one of the following:
– Default - Returns the SSH port the default value (22) and re-enables
SSH after it is disabled.
– Disable - Disables the SSH port by setting the port to 0.
– Port #, then in the field provided, enter a number to re-define the SSH
port (range between 1 and 65535).
e. In the field provided, enter the Idle Timeout Period (in seconds). (Range
between 30 - 1200, 600 seconds is default.)
f. In the field provided, enter the ReKey Interval (in seconds). (Range between 0 -
600, 600 seconds is default.)
Step4 Click Apply to save the changes.
Step5 Click the SSH Main page link to return to the SSH Configuration List page. The new
settings should now be displayed.
Task Complete