Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page8-23
Secure Mode Configuration
Secure Mode is a feature that can restrict system access to the use of only secure
channels. Secure mode can be employed for the WAN interface, LAN interface or
both. When secure mode is enabled, an interface can be designated as trusted,
indicating that unsecure connections are allowed via the specified interface.
Designating an interface as untrusted will enforce the requirement of a secure
channel for access via the specified interface. By default, the WAN interface is
untrusted and the LAN interface is trusted.
The Secure Mode Configuration page is shown below.
NOTE:
When secure mode is enabled, all current non-secure connections via an untrusted
interface will be terminated immediately with the exception of inbound file transfers.
Inbound file transfers will allowed to complete prior to session termination.
To configure Secure Mode, perform the following:
Step1 As required, click the check box to Enable or Disable (box unchecked) Secure
Mode.
Step2 Click to select the LAN Interface mode.
Step3 Click to select the WAN Interface mode.
Step4 Click Apply to save the changes.
Task Complete