Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page8-13
Step2 Optional, click to select Only bridge PPPoE traffic. Proceed to Step4.
Selection of this option will allow only PPPoE traffic to be bridged, all other traffic will
be dropped.
Step3 Obtain an IP address, select from the bulleted options below:
• Obtain configuration automatically from WAN using DHCP
(1) Click the radio button to select this option.
• Configure IP routing manually. This procedure requires the following:
(1) Click the radio button to select this option.
(2) Enter a unique IP Address in the field provided.
(3) Enter a unique Subnet Mask in the field provided.
If IP Routing enabled is selected, click to select the following options:
• NAT Enabled - Network Address Translation (NAT) allows multiple
workstations on your LAN to share a single, public IP address. All outgoing
traffic appears to originate from the router’s IP address.
• Block Net BIOS Traffic - NetBIOS is a PC networking protocol that can
keep network connections open inadvertently. To avoid excess connection
charges, such traffic should be blocked on any metered network service.
Step4 Click Next to proceed with Easy Setup, Dynamic Host Configuration Protocol
configuration (see page8-14).
Task Complete