Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page 8-11
Selection of this option will allow only PPPoE traffic to be bridged, all other traffic will
be dropped.
Step 3 Obtain an IP address, select from the two bulleted options below:
• IP configuration automatically from a DHCP server on the WAN Using
DHCP.
(1) Click the radio button to select this option.
• Configure IP Routing manually. This procedure requires the following:
(1) Click the radio button to select this option.
(2) Enter a unique IP Address in the field provided.
(3) Enter a unique Subnet Mask in the field provided.
If IP Routing enabled is selected, click to select the following options:
• NAT Enabled - Network Address Translation (NAT) allows multiple
workstations on your LAN to share a single, public IP address. All outgoing
traffic appears to originate from the router’s IP address.
• Block Net BIOS Traffic - NetBIOS is a PC networking protocol that can keep
network connections open inadvertently. To avoid excess connection
charges, such traffic should be blocked on any metered network service.
Step 4 Click Next to proceed with Easy Setup, Dynamic Host Configuration Protocol
configuration (see page 8-14).
Task Complete