Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page8-9
A PPP Username and password are required for authentication when the connection
is being established.
Step2 Enter the PPPoE Service Name in the field provided.
PPPoE requires the domain name of your network service provider. Use * as a default
(for all services). Enter the domain name of your network service provider in the
Service Name field.
Step3 Enter the timeout interval (measured in seconds) into the PPPoE Timer field.
PPPoE Timer will set a timeout interval for periods of inactivity. After the number of
seconds elapses, the PPP connection closes to limit timed connection charges from
your service provider. The default entry of “permanent” will keep the PPP connection
open constantly, with no timeout interval.
Step4 As required, click to select PPPoE only Filter.
This selection will filter all traffic on the bridge to allow PPPoE only. Check this box if
you will only connect to your network service using PPPoE.
Step5 Click Next to proceed with Easy Setup, Dynamic Host Configuration Protocol
configuration (see page8-14).
Task Complete