Product specifications

Chapter 8: WEB Management Interface Efficient Networks
®
Router family
Technical Reference Guide
Page8-6 Efficient Networks
®
Point-to-Point Protocol over ATM
Selection of Point-to-Point Protocol over ATM will display the following PPP
Configuration page.
To continue the Easy Setup procedure with PPP over ATM, continue with the
following steps:
Step1 Enter the PPP User Name and Password in the fields provided.
A PPP Username and password are required for authentication when the connection
is being established.
Step2 Click to select the following PPP Networking options:
• Bridging Enabled - Bridging will forward all traffic for remote hosts that is
not routed (non-IP) to the WAN. If Bridging Enabled is selected:
– Optional, click to select Only bridge PPPoE traffic. Proceed to Step4.
Selection of this option will allow only PPPoE traffic to be bridged, all other traffic
will be dropped.
• IP Routing Enabled - IP Routing will route all IP packets for remote hosts to
the WAN.