Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 8: WEB Management Interface
Efficient Networks
®
Page 8-5
On the Protocol Selection page, begin the Easy Setup procedure by performing the
following:
NOTE:
The Easy Setup procedure can be exited at any time during the configuration by
clicking Cancel. If the procedure is cancelled, no changes will be made and the WMI
will return to the Router Information Page.
Step 1 Enter the ATM Permanent Virtual Circuit (PVC) information: VPI / VCI.
Step 2 Click the radio button to select the applicable WAN Protocol.
Task Complete
Step 3 Click Next to continue.
Based on the selection in Step 2, proceed to the appropriate page:
• ‘Point-to-Point Protocol over ATM” on page 8-6
• ‘Point-to-Point Protocol over Ethernet over PPPoA” on page 8-7
• ‘Point-to-Point over Ethernet over RFC 1483” on page 8-8
• ‘RFC 1483 Networking” on page 8-10
• ‘RFC 1483 MAC Encapsulated Routing” on page 8-12