Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 7: Monitoring System Performance
Efficient Networks
®
Page 7-11
Remote Network Access Problems
Bridging
• Make sure to reboot if you have made any bridging destination or control
changes.
• All IP addresses must be in the same IP subnetwork (IP is being bridged).
• Check that a bridging default destination has been configured and is
enabled.
• Be sure to reboot if the bridging destination or status has been changed.
• Check that bridging is enabled locally (use the remote listbridge command).
• Verify that bridging is enabled by the remote router (use the command
remote list).
• Verify that the Authentication Passwords are correct.
• Reboot your PC if you have Windows for WorkGroups.
• In Windows 95, do not forget to declare shared disk directories. Check the
sharing properties on your C: drive.
• In the Terminal Window, check that calls are answered from the remote
router.
• Check also for any PAP/CHAP errors for the remote router.