Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 7: Monitoring System Performance
Efficient Networks
®
Page 7-5
Sets the SNMP password.
-> snmp addtrapdest <ipaddr>
-> snmp deltrapdest <ipaddr>
Commands to creates or delete trap manager entries.
-> snmp settrapenable on | off
Enables and disables trap message transmission.
-> snmp addsnmpfilter <first ip addr> [<last ip addr>] | lan
-> snmp delsnmpfilter <first ip addr> [<last ip addr>] | lan
Commands to creates or delete the client range for SNMP access.
-> snmp enablesnmpif wan | lan
-> snmp disablesnmpif wan | lan
Enables and disables SNMP access from the specified interface.
The following command will display the current SNMP configuration information. An
example is shown below.
-> snmp list
SNMP CONFIGURATION INFORMATION
Community name....................... iads
Port................................. default (161)
IF Enabled........................... LAN only
Clients.............................. all
Global Trap Enable................... on
Configured Trap Destinations......... none