User manual

Efficient Networks, Inc. How do you want to use the Router? 25
Factory Default Configuration
The router is shipped from the factory with particular default settings. You
may or may not need to change these depending on what kind of network
the router is installed.
Configurable Item Default Settings
Operating Mode Router
Ethernet Interface IP Address 10.0.0.1
Network Mask 255.0.0.0
IP Gateway (Default Route)
Address
None
DSL (WAN) Interface IP Address None
Network Mask None
ATM VPI/VCI Number 0/32
Data Encapsulation Protocol PPP
PPP Authentication Username ENI-Router
Password ENI-Router
PPP Multiplexing method LLC/SNAP encapsulation
Hostname speedstream
Domain name router.invalid
DHCP server Enabled
DNS Enabled
DNS Resolver or Forwarders None specified
NAPT Enabled
RIP Enabled; uses RIP2 in passive mode
IP Filtering Disabled
Spanning Tree (bridge only) Disabled