Installation guide

20 Connecting and disconnecting from the Internet
If you are using the Efficient Networks SpeedStream 5200 modem with a USB cable and you wish to use
the Ethernet cable instead, please follow these instructions.
1. Connect the Ethernet cable to the computer, as shown in Installing the Hardware on page 6.
2. Click the icon in the lower left corner of your screen, then click Stop Ethernet USB Adapter.
3. When a message appears saying it is OK to unplug the USB device, unplug the USB cable from your
computer.
4. If you have Windows XP, you’re done. Windows XP will automatically detect which cable you are using.
5. Double-click the Access Manager icon on the desktop.
6. Right click the Business Internet High Speed Enterprise icon, then click Properties.
7. In the Properties window, click the Configuration tab.
8. In the Adapter pull-down menu, click the entry for your
Ethernet card.
9. Click OK.
10. If you want to remove the USB software, follow the instructions under Removing the Business Internet
High Speed Enterprise software from the computer on page 26.
11. Connect to the Internet as described in Connecting and disconnecting from the Internet on page 18.
S WITCHING FROM THE USB CABLE TO THE ETHERNET CABLE