Installation guide

Installing the Hardware 13
1. Make sure your modem and computer are turned on.
If the lights are not on, turn the modem and computer off. Make sure that all the cables are connected
securely, then turn the computer and modem back on. If this does not work, contact the Help Desk. The
appropriate number is on the first page of this guide.
Please proceed to Configuring the Software on the next page.
2. If you have the SpeedStream modem with an Ethernet
cable, wait until the pwr, dsl, and enet lights are on. If
you are using the USB cable, wait until the pwr, dsl and
usb lights are on.
If you have an Alcatel modem, wait until there are two
solid green lights on the modem.
C HECKING YOUR SETUP (CONTINUED)