Technical data

UPS MKD 1500 RT

Device and its Operation

MKD series

If an error is detected on the accumulator, e.g. "Battery not connected" or

"Poor battery status", the display is as follows:

Fig. 7-1 - 11 Battery error

7.2 Operating Manual for the UPS

The operator of this UPS system must always observe the instructions in

this manual. The operator may only undertake the following listed meas-

ures and only with particular care:

Using the operating elements: switch on, start and switch off the

UPS.

Reading the display elements and interpreting the acoustic warnings.

Starting the test operation.

Using the communication interface, whereby the connection to a

computer or other systems must already be present with UPS equip-

ment that have a permanent connection.

The extensive protective functions that the UPS system performs with

regard to the load(s) means that the UPS works completely automatically.

Only the switching on and starting or switching off is done by the opera-

tor. Furthermore, a data exchange can take place via the communication

interface and/or the SNMP adapter, although this is not absolutely neces-

sary for general operation of the system.