Technical data

UPS MKD 1500 RT

Device Description of UPS

MKD series

1 Retaining screws for display

Fig. 3-3 - 7 Retaining screws for display

Remove the four screws (1).

Turn the display 90° so that it sits correctly when the UPS is installed hori-

zontally.

Screw the display back onto the housing.

Refit the front panel on the housing and retighten the two screws

(Fig. 3.3 - 6, Pos. 1).

Fig. 3-3 - 8 Retaining bracket

Fit the two retaining brackets on the side of the housing.