Specifications

95
Special appliances
Product MD-1
Application Constructed for industrial systems
Features Online double-conversion with integrated auto bypass
Mounting height 4U, to achieve a shortened modular
depth of 300mm.
All power lines, outputs and sockets for control signal
(oating contacts) on hardwired Phoenix terminals.
Optimised for 19“ switch cabinet
Basic unit MH RM 2000
Product GSV („Gesicherte Stromversorgung“ [german])
Application The GSV is intended to provide the needed power to electric
drive units for doors during powerfailures in emergency
situations.
Features The GSV provides up to 72 h standby mode and after that about
5 min with 500 W load. The system can be activated by an
external dry contact.
During a powerfailure after a delay (10 seconds default) a signal
switch (500 ms impulse) will be sent to activate the electric drive
unit.
Back in normal mode the mains will be switched directly to the
output.
In normal mode the GSV-system is charging the internal batte-
ries and in emergency mode it monitores the battery voltage.
In- and output single phase hardwired
Capacity 1000VA/670W (maximum 4,3 A)
Cabinet prepared for wall assembly
Electronics: IP65
Batteries: IP21
Dimensions (compl. HxWxD) 500x300x120 mm
Basic unit MT 1000
EFFEKTA
®
UPSs are not only suited for use in computers,
but also for all sensitive, power-dependent units.
We have a solution for every kind of application. We
are also experienced in custom designs and small
production runs.
All models are available in standard enclosures or ac be
supplied for switchboards or DIN rails.