Specifications

67
AC/DC power supplies, chargers, inverters / rectifiers
DC UPS on DIN rail
Specication DT0/012 DT0/024 DT0/048
Input voltage 90…264VAC, 47…63Hz
Output voltage (nominal) 12V 24V 48V
Output voltage (physical) 13.6V 27.2V 54.4V
L.V.D. threshold 10.5V 21V 42V
Output current nominal 12A 21A 5.5A 7A 11A 18A 3A 4A 6A 9A
Power ( w/o battery) 140W 240W 140W 190W 290W 470W 140W 190W 290W 470W
Recommended batt. capacity 5…18Ah
Dimensions (W x H x D in mm) 210x105x85 210x105x85 250x133x85 250x133x120 210x105x85 250x133x85 250x133x120
Weight (w/o battery) 1.5kg 1.6kg 1.5kg 1.7kg 2.3kg 2.8kg 1.5kg 1.7kg 2.3kg 2.8kg
Operating temperature 0…40°C, battery up to +30 °C
Signals Dry contacts: Mains fault, dc low voltage
Displays LED green “Operation“, red LED “Mains fault“, red LED “Battery weak“
Service Push-buttons - “Output on/off“, “Automatic restart on/off“
Safety EN60950, EN50091-1-2
EMI EN50091-2
Batteries
Dimensions / weight
(H x W x L in mm)
L.V.D.
voltage
Back-up time in minutes at load (current)
2A 4A 6A 8A 10A
5Ah
107 x 70 x 90 / 2.1kg 10.5V
105 50 25 15 72x (107 x 70 x 90) / 4.2kg 21V
4x (107 x 70 x 90) / 8.4kg 42V
2A 4A 6A 8A 10A 12A 14A
7.2Ah
101 x 65 x 151 / 2.7kg 10.5V
150 65 38 25 20 13 72x (101 x 65 x 151) / 5.4kg 21V
4x (101 x 65 x 151) / 10.8kg 42V
2A 4A 6A 8A 10A 12A 14A 16A 18A
12Ah
101 x 98 x 151 / 4.2kg 10.5V
295 140 84 54 39 31 25 20 182x (101 x 98 x 151) / 8.4kg 21V
4x (101 x 98 x 151) / 16.8kg 42V
2A 4A 6A 8A 10A 12A 14A 16A 18A 20A
18Ah
167 x 88 x 181 / 5.7kg 10.5V
470 200 121 93 66 48 40 34 29 262x (167 x 88 x 181) / 11.5kg 21V
4x (167 x 88 x 181) / 23kg 42V
BT 12-18 (18Ah)
BT 12-5 (5Ah)
BT 12-12 (12Ah)
BT 12-7.2 (7.2 Ah)
Specications
Specifications