User Guide

Operating Instructions
F
U
S
E
❽
power switch
❾
vacuum control
❹
vacuum pickup pen and air hose
pickup tip and vacuum cup
❻
plant air
❶
air input
hose
foot pedal
assembly
power cord
❼
filter/muffler
❷❸
❺
check voltage label
on console
Setup
Connect the air input hose assembly
to clean, dry, filtered plant air ❶
using the fittings supplied. Set plant
air supply within 80 to 100 psi (5.5
to 6.9 bar). Where required, use an
EFD five-micron filter regulator
(#2000F755).
Attach the air input hose coupling
❷ to the vacuum pen console.
Plug in the polarized foot pedal
connector
❸.
Insert the black quick-connect ❹
from the vacuum pen into the air
output fitting on the front panel.
Connect the power cord ❺ to a
grounded 120 VAC outlet. (220 VAC
is available. Check voltage label.)
Twist on the appropriate pickup tip
❻ and vacuum cup.
Install the filter muffler ❼ on the
vacuum transducer. The vacuum
pen is now ready for use.
Operation
Press the power switch ❽ to turn
on the unit.
Position the vacuum cup on the
component and press the foot
pedal
❸ to activate the vacuum.
Adjust the vacuum by turning the
vacuum-control knob
❾ on the
front panel. Turn counterclockwise
to increase vacuum.
Pick up and place the component.
Release the foot pedal
❸ when the
component has been placed. Vacuum
to the pen will stop immediately.
Specifications
Input Voltage: 90-120 VAC
(220 VAC available)
Power Required: 50/60 Hz 24/20 VA
Internal Voltage: 24 VAC
Input Air Pressure: 80 to 100 psi
(5.5 to 6.9 bar)
Vacuum: Internal venturi
Up to 15 inches HG
Air Consumption: Less than 1/2 CFM
at full continuous operation
Overall Cabinet Size:
5 1/4" x 7 1/4" x 2 1/2"
(13.3 x 18.4 x 6.4 cm)
Weight: 3 lb 5 oz (1.50 kg)
If you require any assistance, or have
specific questions, please contact us.
US: 800-556-3484
Mexico: 001-800-556-3484
UK: 0800 585733
Fax:[phone]
e-mail: [e-mail]
www
.efd-inc.com
Note: For very small components,
contact an EFD Fluid Application
Specialist for tip recommendations.
One Year Warranty
The vacuum pen is warranted for
a period of one year from date of
purchase. This warranty is valid only
when clean, dry, filtered air is used.