User Guide

6. Select the COM port to which the Socket adapter is connected and click “OK.”

7. Click the Properties button on the main window.

8. On the General tab, enter EFxxxxx (where xxxxx is

the 5-digit serial number of the Ultra TT unit) in the

Friendly Name box.

NOTE

Once you have configured a Socket adapter for a specific

Ultra TT, it is recommended that you do not use that

adapter on a different Ultra TT unit to avoid confusion

during Pairing (ref: Section III).

Otherwise, reconfigure the Socket adapter by following the

above procedures before using it with a different

Ultra TT unit.

A NORDSON COMPANY

Ultra TT Bluetooth

Configuration Procedure

Click here to change PORT

Click “OK” once correct

PORT is selected