User Guide

A NORDSON COMPANY

This document accompanies the EFD Ultra TT Bluetooth Kit (PN 700855) and provides step-by-

step instructions for configuring the Ultra TT for use with Bluetooth. The Kit contains the following:

• CD containing EFD Ultra TT Version 1.2 firmware, User Guide and PDA Software (PN 7203452)

• Cordless Serial Adapter (PN 700856-1) which includes:

– Socket

™

Cordless Serial Adapter with Bluetooth

Wireless Technology

– AC Adapter

– Null Modem Connector

You will also need the following (not included in the Kit) to run Bluetooth on the Ultra TT:

• Bluetooth-enabled PDA

NOTE

The PDA should be fully charged before performing these procedures.

• Ultra TT Main PWA Board, Rev H with firmware Version 1.2 or higher

(Refer to Section II of this document for more details)

NOTE

Customers with Ultra TT systems with serial number EF30188 and below will need to purchase and

install a NEW main board (PN 700835). All new main boards come pre-installed with the Version 1.2

firmware.

Customers with Ultra TT systems with serial numbers EF30189—EF30372, will only need to install/re-

flash the Version 1.2 firmware on their existing board.

As of the published date of this document, the following Palm PDAs have been tested and known to work with the Ultra TT software

and hardware: Zire™ 72, Tungsten™ T, Tungsten™ T3, Tungsten™ T5, Tungsten™ E2.

Ultra TT Bluetooth

Configuration Procedure