User Guide

Important Notes

Recharge the PDA and sync it to your computer at the end of every day. Otherwise, you might

lose the information entered since the last sync session.

The next time you want to connect to the Ultra TT using the same PDA, launch the EFD Ultra TT

PDA Application. When asked if you wish to reconnect to the last device you communicated

with, select “Yes” and go through the re-initialization steps.

If you are using a new PDA or a different PDA from the one last used/paired with the Ultra TT,

you must perform steps 7-10, Section 3 again to pair the new PDA with the Socket Adapter

installed on the Ultra TT.

If the PDA ever gets out of range of the Ultra TT (approximately 30 feet), Communications Error

#1104 will occur. The Bluetooth connection will be re-established automatically when the PDA

comes back within range.

If the PDA powers down, it may be able to reconnect without restarting the Ultra TT and the EFD

Ultra TT PDA Application by waiting 8-10 seconds. In this case, the Bluetooth Reconnect

window will pop up and communication will be established. (If the Reconnect window does not

pop up, restart the application by returning to PDA Home and relaunching the EFD Ultra TT PDA

Application.)

A NORDSON COMPANY

Ultra TT Bluetooth

Configuration Procedure