User`s guide

i. LOCK-OUT TAG-OUT PROCEDURE
1. Announce lockout to other personnel.
2. Verify that all dispensing motion has stopped.
3. Turn power OFF at main power circuit breaker at the back of the EFD
®
TT
4. Disconnect the power cord from the electrical source. Place the power cord in a location where it can be
seen at all time during the maintenance or service.
5. Place a warning tag on the Main Power Inlet.
6. Turn the shut-off valve for the pneumatic circuit to the OFF position
7. Lockout power in OFF position.
8. Put key (if any) in pocket.
9. Clear machine of all personnel.
10. Test lockout by hitting RUN button.
7
Potential Pinch Hazard
WARNING! There are several pinch points (indicated with yellow hazard stickers) on this machine
that should be avoided. Failure to do so while the machine is operating may cause serious injury.
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2