User`s guide

APPENDIX A
Jogging your Machine
The machine is shipped with factory defaults that allow the machine to be jogged at
easily controllable speeds. You can change the speeds by amending the values in the
Preference setting within the PDA. Note that the jog settings will remain with that PDA
even when connected to various machines. You can also choose to send the
customized preferences to the machine.
To customize the jog preference, tap the upper left
hand corner of the blue menu bar and select
“Options” “Preferences”.
The factory set defaults will appear. To change the settings, tap the field you want to
change and enter the new value. Tap the “OK” button to save your new settings. To
change the machine’s jog preference, tap the “Send” button. This will cause the front
panel jog to mimic the preference stored in the PDA. To change the jog preference
back to factory defaults, tap the Reset button.
You have several ways to move the dispense tip, i.e. typing in the XYZ coordinates,
using the blue field and compass rose or using the hard buttons on the Palm‘
handheld.
A.1 USING THE BLUE FIELD AND COMPASS ROSE
The blue field in the Jog window represents the work envelope. By tapping in the blue field, you can produce gross XY
movements at the zero or safe Z-height. The location can then be further refined using the compass rose.
Holding or tapping a select arrow on the compass rose will move the dispense tip in that direction. Select between the two
modes (XY or Z) by checking the appropriate box. The XY mode allows you to jog 8 directions, XY and 45° diagonals, while
the Z mode allows for the Z-axis movement.
66
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2

XY Z

XY Z
Two modes of jogging (XY or Z). Check box
for the appropriate mode
Slow or turbo speed
settings.
black= slow
white= turbo