User`s guide

Never move or ship the unit with the tooling plate attached to the Y-Axis. The added weight will cause
damage during shipment! All axes must be secured in place prior to shipping. Not doing so will cause
damage to the equipment.
Provide maintenance in strict compliance with procedures set forth in this guide. Never try to perform
maintenance on a machine while it is running. Doing so could cause serious injury.
Periodic preventive maintenance will be required.
1. Annually, apply a light coat of grease on the cable and linear motion guides.
2. Cables should also be tensioned on an annual basis.
See Section 10 for details
All positive pneumatic energy is removed from the system at both power-down (turning off the main
circuit breaker) and during EMO (Emergency Machine Off) conditions. The EFD
®
TT maintains a
vacuum in order to hold a column of fluid inside EFD barrel syringes. This is designed as a safeguard
to prevent low viscosity fluid from being discharged at power-down or during EMO conditions.
Laser-equipped EFD
®
TT system is classified as a Class II laser product.
Please attach the appropriate warning label that is shipped with your
laser module onto the machine. The warning label should read “LASER
RADIATION PRESENT. DO NOT STARE INTO BEAM”.
6
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2
RoHS标准相关声明 (China RoHS Hazardous Material Declaration)
产品名称 有害物质及元素
Part Name Toxic or Hazardous Substances and Elements
铅 汞 镉 六价铬 多溴联苯 多溴联苯醚
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
Chromium Biphenyls Diphenyl Ethers
(Pb) (Hg) (Cd) (Cr6) (PBB) (PBDE)
金属转接头 XO O O O O
All Brass Fittings
O: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C 的标准低于
SJ/T11363-2006 限定要求。
O: Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T11363-2006.
X: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C 的标准高于
SJ/T11363-2006 限定要求.
X: Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T11363-2006.