User`s guide

7.5 HEIGHT SENSOR Z-OFFSET
Z Offset for the height sensor can be taught from the front panel by selecting and running, program 97 for Valve #1 and
program 96 for Valve #2. Follow the four steps in the macro to accomplish the offsets. If you have inserted a height sense
in your program, you must run this macro each time you change your dispense tip.
7.6 VALVE PURGE
From time to time, it may be necessary to purge the valve or prime the dispense tip. To run the purge routine, select and
run program 99 from the front panel for Valve #1 and program 98 to purge the Valve #2 (Toggle Valve).
57
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2