User`s guide

To pause or abort a program while it is running, press the button beneath the respective word.
During a pause or abort command, the machine will complete its
current dispensing instruction before turning the dispenser off. An
aborted program ends the cycle and sends the machine to the park
location.
To resume a paused program, press the button beneath the word
“RESUME”. This will re-start the program at the point in the program
after the Pause signal was received.
Note: Aborted programs cannot be resumed.
7.4 TIP OFFSET/RELOCATE
The EFD
®
TT System manages tip offset by adjusting the position of the
program origin. The offset manager can be set to run automatically
every time a program is cycled or the User can use the PDA to change
origin when desired.
If selected to teach at run-time from the program origin teach window,
the User will be required to verify the dispense tip location and re-teach
the origin if necessary.
To relocate the tip, press the “JOG” button and then use the arrow keys
on the front panel to adjust tip to the desired position before pressing
the “TEACH” button.
56
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2