User`s guide

7.2 LOADING A PROGRAM
After the power-up sequence, the LCD will display the RUN screen
of the program last executed.
To load a new program, press “LOAD”. This will open the program
LOAD screen.
Scroll through the program list until the desired program is
displayed and press “DONE”.
Scrolling is accomplished with the rotary knob located on the front
panel. Only previously downloaded programs will be displayed, i.e.
if only four programs are downloaded onto the system, then only
four programs will be displayed and scrollable in the list.
7.3 RUNNING A PROGRAM
Once a program has been selected and loaded, the LCD will display
the RUN screen for that program. The RUN screen displays:
• Program Number
• Program Name
• (3) User defined comments
9
• Run count, and
• The cycle time it took to complete the last run of the program.
To run a program, press the button located beneath word “RUN”.
55
9
The first three lines of the program are reserved for user comments. At this time, these comment lines are not accessible to the user.
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2