User`s guide

7.1 POWER UP
Upon power up, the LCD will display a splash screen that indicates
machines version of firmware (circled). The main board power-up test
result will also be displayed here (either “OK” or “FAIL”).
Note: As of the published date of this manual, the most current
Firmware is Version 1.1
If a power-up failure occurs, a soft key will appear to prompt for
corrective actions. Press the dome switch under “Next” and follow the
instructions. This will usually be followed with an error message
stating what failure occurred.
Corrective action should be taken according to displayed text.
Error messages display the problem and corrective actions are to be
taken. The LCD will prompt the Operator to perform a specific
corrective action or refer the Operator to the technical manual for
further explanations.
54
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2