User`s guide

6.9 EDITING FUNCTIONS
There are several editing functions available within the Program mode.
6.9.1 DELETING INSTRUCTION LINE(S) WITHIN A PROGRAM
1. Tap the top left-hand corner of the Program screen.
2. From the “Edit” drop-down menu, select “Mark”.
3. Select the program lines you want to delete. A “->” sign will appear before the
instruction to indicate which line has been selected.
4. From the “Edit” drop-down menu, select “Cut”. The selected instruction lines will
be deleted from the program.
6.9.2 COPYING INSTRUCTION LINE(S) INTO ANOTHER PROGRAM
• Tap the top left-hand corner of the Program screen.
• From the “Edit” drop-down menu, select “Mark” for line-by-line selections or
“Select All” to pick all the instruction lines. Tap the selected line again to deselect it.
• Select the program lines you want to copy. A “->” sign will appear before the
instruction to indicate which line has been selected.
• From the “Edit” drop-down menu, select “Copy”.
• Go to the program you want to paste these instruction lines onto.
• From the “Edit” drop-down menu, select “Paste”. The selected instruction lines will
be copied into the new program.
53
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2