User`s guide

52
6.7 CHANGING PROGRAM ID NUMBER
From time to time, you may need to reassign a program ID number. To do this, select
Program ID in Edit drop-down menu. This will open the Change Program ID window.
The Change Program ID window displays the
current program ID number and the closest open
available ID number. You can enter the desired ID
number or use the default number provided.
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2
6.8 CHANGING PROGRAM ORIGIN
You can change the program origin anytime:
• Tap the top left-hand corner of the Program screen.
• From the “Edit” drop-down menu, select “Program Origin”.
• Tap “Go To” to check the position of the current program origin
• Jog to the new program origin position
• Tap “Teach” to confirm
Note: Before confirming/changing program origin, the toggle valve will toggle up if it is
in the down position.
WARNING! Do not tap “Teach” when Z is at zero position. Tapping “Teach” at zero position will erase
all Z coordinates in the program and they cannot be recovered. You will then have to manually re-enter
each line of the program.