User`s guide

6.5 COPYING A PROGRAM (SAVE AS)
To copy an existing program, simply save the current program under a new name.
This creates an exact copy with a different name.
Tap on “Save As” from the Program drop-down menu. The name of the program
currently opened will be displayed and highlighted in the “Save As” edit field. This
facilitates name changing when the new name will be similar to the existing program.
Note that program names are case-sensitive.
Once the program has been copied (save as), you
will be in the new program that you just saved.
51
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2
6.6 INSERTING/DELETING POINTS IN A PROGRAM
Points are inserted at the current point where the instruction is inserted. This means if you have point #5 highlighted in the
Program edit window and select “Insert”, you will insert a new command at that point. The current point #5 will become
point #6.
To delete a point in a program, you must highlight the point and tap “Delete”. This will delete the current point and move all
subsequent points up by one position.
It is important to note that when editing CP points, the line type “Edit” button can only be viewed from the CP Start point.
To edit the line parameter for a continuous path, you must go to the CP Start Point and tap “Edit”.