User`s guide

SAFETY
• Read and understand this User’s Guide and all safety labels before operating this machine.
• Only a trained person is to be permitted to operate this machine. Training should include instructions in operation
under normal conditions and emergency situations.
• This machine is to be serviced only by trained and authorized personnel. Lockout procedures should be strictly
followed before servicing.
• Never reach into the machine for any reason unless the machine is at a COMPLETE STOP.
• Never leave the machine stopped in such a manner that another worker can start the machine while you are
working on or within the machine.
• Never change or defeat the function of electrical interlocks or other machine “shutdown” switches.
• Before starting this machine, check that:
- All persons are clear of the machine
- No maintenance work is being performed on the machine
- All guards are in place
- The machine is free of paper scraps, wraps and jams.
• There is a potential hazard of entanglement in this machine caused by items such as long hair, loose clothing, and
jewelry. Make sure your clothing and hair fit closely to your body and that all jewelry, rings and watches are
removed while working on the machine.
WARNINGS
The EFD
®
TT Series is designed for semi-automated fluid dispensing onto assembly parts. Users should
always use appropriate personal protective gear as indicated by fluid manufacturer.
This product is heavy and should only be moved with assistance. Always follow safe lifting practices
and lift with your legs, not your back. Handles can be attached to the machine's T-slots located on the
side of the machine. This will provide for a more secure grip when moving the machine.
Remove shipping bolt (located at the top right-hand corner of the Z-plate) before operating the
machine. Failure to do so may result in machine damage.
Never place your hand beneath the dispensing tip or any moving actuator during operation, as
automatic movement can occur and may cause serious personal injury.
Please read all safety warnings prior to handling equipment or the dispensing fluid. Equipment should
be stored in a clean, dry environment, preferably in original shipping container.
This machine emits a maximum of 63 dBA of noise from the rear of the machine. Note that this is well
within safe noise levels for operators.
5
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2