User`s guide

47
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2
5.8 INSERTING AN OUTPUT INSTRUCTION
The Output instruction is available in the Select Instruction drop-down menu. It allows the User to insert an
instruction into the dispense program that will assert or negate up to three specified output bits.
The map below indicates the pin assignment for the DB25 connector for general-purpose outputs.
It also indicates the specific bit assigned to each of the output that is used in the PDA software to read output.
For assistance in creating the logic scripts and to load inputs, please contact your local EFD representative.
General Purpose Output Connector Map
8
The assigned address for the particular I/O.
Pin# Description Name Bit
8
25 spare
24 spare
23 D_COM_Sink
22 D4_Sink GP_OUTPUT_15 Bit 25
21 D3_Sink GP_OUTPUT_14 Bit 24
20 D2_Sink GP_OUTPUT_13 Bit 23
19 D1_Sink GP_OUTPUT_12 Bit 22
18 C_COM_Sink
17 C4_Sink GP_OUTPUT_11 Bit 21
16 C3_Sink GP_OUTPUT_10 Bit 20
15 C2_Sink GP_OUTPUT_9 Bit 19
14 C1_Sink GP_OUTPUT_8 Bit 18
13 Spare
12 Spare
11 Spare
10 B4_Source GP_OUTPUT_7 Bit 17
9 B3_Source GP_OUTPUT_6 Bit 16
8 B2_Source GP_OUTPUT_5 Bit 15
7 B1_Source GP_OUTPUT_4 Bit 14
6 B_COM_Source
5 A4_Source GP_OUTPUT_3 Bit 13
4 B4_Source GP_OUTPUT_2 Bit 12
3 A2_Source GP_OUTPUT_1 Bit 11
2 A1_Source GP_OUTPUT_0 Bit 10
1 A_COM_Source