User`s guide

4.4 PARK LOCATION
The park location is the position you want the dispense tip to move to after it has completed its taught program. This
location is often a position closer to the work-piece than mechanical home in order to shorten the work cycle and also allows
ample space for the part to be removed from the fixture plate.
The default park location is set to mechanical home position which is X=0,Y=0, Z=0.
This is indicated in the drop-down box as Home.
To teach a new park location, first select “New”. Enter the new Park Location name. Next,
teach the location by tapping “Jog” and moving the dispense tip to desired location. Tap
“OK” to return to Park Location setup screen. Tap “Teach” to complete the new Park
Location setup.
To use the toggle bracket at park location, check the “Use Toggle” box. This will actuate
the toggle bracket i.e. toggle down, at that park location, otherwise, the toggle bracket
will toggle up at the part location. Teach the park location as above.
Maximum number of locations is ten. Note locations include park, purge and purge
toggle.
4.5 PURGE VALVE #1
To teach a new purge location:
1. Select “New”. Enter the new Purge Location name.
2. Teach the location by tapping “Jog” and moving the dispense tip to desired
location. Tap “OK” to return to Purge Location setup screen.
3. Enter the desired purge time (in seconds). Note that the purge time is limited to a
maximum of 65.535 seconds.
4. Tap “Teach” to complete the new Purge Location setup.
5. The selected purge routine is downloaded the next time a download from the PDA
occurs. Once downloaded onto the machine, the purge routine can be accessed
through the front panel LCD in program 99.
34
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2