User`s guide

4 SYSTEM CONFIGURATION
After performing the discovery and pairing of the PDA and the EFD
®
TT (Section 3), go into the Setup screens to configure
your EFD
®
TT system for the specific valve/syringe barrel setup appropriate for your fluid dispensing application. You have to
complete this setup first or you will not be able to program the dispensing pattern correctly.
From the Main screen, tap “Setup”. This will take you into the Setup screen. If this is the first time you are accessing the
software since powering up, a message informing you that the dispenser is “about to home”. Tap “OK” to continue.
There are a total seven (7) Setup screens:
1. Valves
2. Units
3. Height Sensor
4. Park Location
5. Purge Valve #1
6. Purge Toggle
7. Safe Z
4.1 VALVE SELECTION
First, make the Valve Bracket selection i.e. Single, Dual, Triple or Toggle.
When using dual or triple valves, you are required to mechanically align the secondary and tertiary valves to your parts.
28
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone] Asia [phone]
Sales and service of Nordson EFD dispensing systems are available worldwide.
EFD
®
TT User's Guide
Version 1.2
Allows operator to
navigate forward or
backward between
setup screens
Allows operator to select
a specific setup screen
from
a pull-down menu