User`s guide

Safety

Fire Safety

To avoid a fire or explosion, follow these instructions.

• Shut down all equipment immediately if you notice static sparking or arcing. Do not restart the

equipment until the cause has been identified and corrected.

• Do not smoke, weld, grind or use open flames where flammable materials are being used or stored.

• Provide adequate ventilation to prevent dangerous concentrations of volatile particles or vapors.

Refer to local codes or your material MSDS for guidance.

• Do not disconnect live electrical circuits when working with flammable materials. Shut off power

at a disconnect switch first to prevent sparking.

• Know where emergency stop buttons, shutoff valves and fire extinguishers are located.

• Clean, maintain, test and repair equipment according to the instructions in your equipment

documentation.

• Use only replacement parts that are designed for use with original equipment. Contact your EFD

representative for parts information and advice.

Action in the Event of a Malfunction

If a system or any equipment in a system malfunctions, shut off the system immediately and perform

the following steps:

• Disconnect and lock out system electrical power.

• Identify the reason for the malfunction and correct it before restarting the system.

Disposal

Dispose of equipment and materials used in operation and servicing according to local and national codes.

RoHS标准相关声明 (China RoHS Hazardous Material Declaration)

产品名称有害物质及元素

Part Name Toxic or Hazardous Substances and Elements

铅汞镉六价铬多溴联苯多溴联苯醚

Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated

Chromium Biphenyls Diphenyl Ethers

(Pb) (Hg) (Cd) (Cr6) (PBB) (PBDE)

金属转接头 XO O O O O

All Brass Fittings

O: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C

的标准低于SJ/T11363-2006 限定要求。

O: Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,

according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T11363-2006.

X: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C

的标准高于SJ/T11363-2006 限定要求.

X: Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,

according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T11363-2006.