User Guide

Care and

Preventative

Maintenance

The ProcessMate and accessories will last a long time if they are maintained properly

and handled with care.

• The ProcessMate should be kept clean and dry.

• Make sure the unit is unplugged when conducting maintenance on the unit.

• Clean the unit with a damp sponge or cloth. Use warm water and mild soap solution,

if required. DO NOT allow drips or excess water inside the unit. DO NOT spray

or pressure wash unit.

• The ProcessMate does not have any user serviceable parts inside. Removing the

protective housing will void the product warranty.

• External parts should be monitored for wear. Inspect the tube insulation regularly for

signs of aging and cracking. Inspect air fittings for signs of leakage.

• Contact EFD for replacement parts.