User Guide

CAUTION: Fill reservoir no higher than maximum fill level shown.

Setup

Step 2.

Pick up piston

with installation tool.

Step 1.

To unlock, rotate grip

until white ring appears.

Step 2.

Slide flange of reservoir into

slot of dispensing pen.

Step 4.

Pull firmly on tip protector

to remove.

Step 3.

Rotate grip to lock

reservoir in place.

Step 5.

Insert quick-connect into air

outlet fitting on dispenser.

Turn clockwise to lock.

Step 1.

Fill reservoir using loading

tube supplied. Stop fill at

maximum fill level shown.

Step 3.

Install piston with tool supplied.

Push tool until shoulder stops

against reservoir.

For pen maintenance and replacement parts, see back cover.