User Guide

ManualsBrandsEFD ManualsOtherDISPENSGUN

Operating Instructions

The DispensGun

is easy to use and

requires no special techniques.

The amount dispensed is controlled by

the squeeze of the trigger and the size of

the dispensing tip (larger tip, more flow).

When the trigger is released, the plunger

retracts away from the reservoir piston,

and dispensing stops.

Follow this step-by-step guide to begin

using your new DispensGun.

Summary of content (8 pages)

PAGE 1
® Operating Instructions The DispensGun® is easy to use and requires no special techniques. When the trigger is released, the plunger retracts away from the reservoir piston, and dispensing stops. Follow this step-by-step guide to begin using your new DispensGun.® R 2 The amount dispensed is controlled by the squeeze of the trigger and the size of the dispensing tip (larger tip, more flow).
PAGE 2
Features ® The unique DispensGun simplifies applications of medium to high viscosity fluids. It is very easy to use and less fatiguing than other manual applicators. • Rugged construction provides years of productive use. • Designed specifically for use with ULTRA System™ component technology to eliminate drooling or dripping of fluids. • Adjustable trigger fits all hand sizes.
PAGE 3
Filling Dispensing Barrels ➀ Fill barrel, leaving required empty space as shown on fill level chart on the left. ➁ Insert piston. A piston must always be Fill level ➀ ➁ ➂ Barrel Fill Level 3cc 5cc 10cc 30cc 55cc ½" ¾" ¾" ¾" ¾" used when operating the DispensGun®. ➂ Twist on orange tip cap and install orange end cap to provide airtight storage seal. You may be using prepackaged barrels supplied by your distributor.
PAGE 4
Operating the DispensGun® ➀ ➀ Gently squeeze trigger and move selector ➂ ➁ button to R. ➁ Pull out drive rod as far as it will go. ➂ Set hand grip by squeezing trigger and R 2 1 R 2 1 moving selector button to 2 or 1. ➃ Attach barrel to gun. Twist to lock. ➄ Remove tip cap and attach dispensing tip. ➃ ➄ ➅ ➅ Turn drive rod knob until teeth face down and trigger mechanism is engaged (arrow on back of knob points down). Push drive rod until plunger touches piston.
PAGE 5
PAGE 6
PAGE 7
PAGE 8