User`s guide

7
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone]
India+ 91 80 4021 3600 Asia +China: [phone]
• Test – Verify operation of features and performance of equipment using the ‘Features and
Controls’ and ‘Getting Started’ sections within this user guide. If necessary, refer to the
‘Troubleshooting Guide’ elsewhere in this user guide. A faulty or defective unit should be returned
to EFD or representative for refurbishment.
• Use only replacement parts that are designed for use with original equipment. Contact your EFD
representative for information and advice.
• Caution: Use or wear adequate ear protection when operating the vacuum in close proximity for a
prolonged period of time.
Action in the Event of a Malfunction
If a system or any equipment in a system malfunctions, shut off the system immediately and perform
the following steps:
• Disconnect and lock out system electrical power. If using hydraulic and pneumatic shutoff valves,
close and relieve pressure.
• Identify the reason for the malfunction and correct it before restarting the system.
• For EFD-powered dispensers, remove the syringe barrel from the adapter assembly. For EFD
electro-mechanical dispensers, slowly unscrew the barrel retainer and remove the barrel from the
actuator.
Disposal
Dispose of equipment and materials used in operation and servicing according to local codes.
RoHS标准相关声明 (China RoHS Hazardous Material Declaration)
产品名称 有害物质及元素
Part Name Toxic or Hazardous Substances and Elements
铅 汞 镉 六价铬 多溴联苯 多溴联苯醚
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
Chromium Biphenyls Diphenyl Ethers
(Pb) (Hg) (Cd) (Cr6) (PBB) (PBDE)
金属转接头 XO O O O O
All Brass Fittings
O: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C
的标准低于SJ/T11363-2006 限定要求。
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this
part, according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T11363-2006.
X: 表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C
的标准高于SJ/T11363-2006 限定要求.
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this
part, according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T11363-2006.