User`s guide

3
www.nordsonefd.com [e-mail] USA & Canada 800-556-3484 Europe [phone]
India+ 91 80 4021 3600 Asia +China: [phone]
Contents
EFD Product Safety Information ......................................................................4-7
Specifications....................................................................................................8
Features and Controls........................................................................................9
Getting Started ..........................................................................................10-12
Dispensing System Setup ..........................................................................13-14
Filling the Syringe Barrel ............................................................................15-16
Barrel Loaders ................................................................................................17
Replacement Parts ..........................................................................................18
Accessories ....................................................................................................19
Troubleshooting Guide ....................................................................................20
Helpful Hints/Suggestions on Settings ..............................................................21
Warranty ........................................................................................................23
IMPORTANT SAFETY INFORMATION
All EFD disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps, and
dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components will
compromise dispensing accuracy and may increase the risk of personal injury.
Always wear appropriate protective equipment and clothing suitable for your dispensing application.
Do not exceed maximum operating pressure of 100 psi (7.0kg/cm
2
).
Do not heat syringe barrels or cartridges to a temperature greater than 100°F (38°C).
Dispose of components according to local regulations after one-time use.
Do not clean components with strong solvents (e.g. MEK, Acetone, THF).
Cartridge retainer systems and barrel loaders should be cleaned with mild detergents only.
To prevent fluid waste, use EFD SmoothFlow
TM
pistons.