User Guide

Specifications
General
Size: 116.1 mm length x 34.9 mm diameter
(4.57” x 1.375” )
Weight: 18.9 oz (537 grams)
Air cylinder body: Type 303 stainless steel
Fluid body and cap: Type 303 stainless steel
Fluid inlet thread: 1/4 NPT female
Output thread: 1/4 NPT female
Piston: Hard-coated aluminum
Spool: Hardened stainless, hard-chrome coated
Spool seals: Hytrel
®
(Viton
®
optional)
Air pressure required: 70 psi (4.8 bar)
Maximum fluid pressure: 2,500 psi (172 bar)
Mounting hole: 5/16-24 UNF tapped hole or
adjustable mounting block
ValveMate Concept
The ValveMate 7000 provides easy adjustment of valve
open-time for maximum end-user convenience and
efficiency. Valve open-time is the primary control of deposit
size. The 7000 puts push-button adjustment of valve
open-time where it needs to be – at the valve location.
Deposit size can be programmed by pressing the
PROGRAM button in the SETUP mode. This affords an
easy starting point for selecting deposit size.
Note: The EFD Ultra
®
TT 325 and 525 XYZ automated
dispensing systems have integrated ValveMate controllers
for operating all EFD dispense valves.
POWER
RUN
SETUP
CYCLE
STOP
Test
Clear
Purge
Run
Setup Program
Fast Slow
Time Set
Steady
Pressure
Time
Fast Slow
Time Set
®
A NORDSON COMPANY
VALVEMATE
7000
Function Indicators
Emergency Stop
Control Pad
set time
timer bypass
display pressure (psi, bar)
TEACH program
test cycle
purge
air input
power input
(voltage selector)
air output to valve
I/O connector with alarm
output (<60 psi)
connector for
optional foot pedal
Rear Panel
Pressure/Time Toggle
For consistent dispense valve operation and easy adjustment
of valve output, EFD recommends using the ValveMate 7000
controller on all automatic, semi-automatic and benchtop
applications.
The EFD Ultra TT Series positioning systems incorporate
dispensing control into the main system.
Contact the EFD Dispense Valve Systems Group for details.
For EFD sales and service in over 30 countries,
contact EFD or go to www.efd-inc.com/contact
EFD, Inc.
East Providence, RI USA
800-556-3484; [phone] (outside the USA)
[e-mail] www.efd-inc.com
EFD International Inc.
Dunstable, Bedfordshire, UK
0800 585733 or [phone]
Ireland 00800 8272 9444
[e-mail] www.efd-inc.com
EFD, Inc., Asia
China: [phone]
[e-mail] www.efd-inc.com/cn
Singapore: [phone] [e-mail]
Hytrel and Viton are registered trademarks of DuPont.
©2006 Nordson Corporation 736-INSTALL-01 v062606
®
A NORDSON COMPANY