User Guide

Manual/Programmed Dispense Select

• Each mode allows you to access different features on the menu-driven display. Press the

“hand” icon to change from Manual mode to PROGRAMMED DISPENSE mode.

• In MANUAL mode, you can use the foot pedal to dispense a continuous bead of fluid. You are

in MANUAL mode when the red light next to the “hand” icon is on.

• In PROGRAMMED DISPENSE mode, you can set several variables, including Program Number,

Syringe Barrel Size, Deposit Volume, Dispense Rate, Pause and Pullback. You can also use the

foot pedal or the Cycle Start button to dispense a single dot of fluid. You are in PROGRAMMED

DISPENSE mode when the light next to the “hand” icon is off.

Cycle Start

Cycle Start in PROGRAMMED DISPENSE mode

• In PROGRAMMED DISPENSE mode, pressing the Cycle Start button once will return you to the

Home screen. Pressing it a second time will dispense a single deposit.

• Note: pressing the Cycle Start button accidentally while already in a dispense cycle can abort

your program. Therefore, we recommend that you use the foot pedal (instead of Cycle Start) to

activate the dispense cycle.

Cycle Start in MANUAL mode

• In Manual mode, pressing the Cycle Start button once cancels the Manual selection and returns

you to Programmed Dispense mode and the Home screen.

Program Number

In both PROGRAMMED DISPENSE and MANUAL mode, select the Program Number by pressing

the prg button. The Program Number will flash. Use the (+) or (-) buttons to change or select the

Program Number as needed. For more details, see the Program section on page 15.

Program

number

Reset

Barrel

select

Manual/Program

select

Cycle

start

Home

Jog

Dispense rate &

Shot count/Volume

Reset

shot count

Manual dispense rate

Decrease

Pullback/Back

Increase

Deposit volume/

Forward

Pause

Features &

Controls