User Guide

The Ultra 2800 Dispensing System is designed to provide complete process control using a patented
positive displacement technology.
There are four core variables to the system: Deposit Volume, Dispense Rate, Pause and Pullback. To
achieve the ideal deposit size, adjust only one of these variables at a time, in small increments.
Key features include
• Repeatable, precise fluid control
• All electric; no requirement for compressed air
• Programmable Pullback to eliminate oozing
• Menu-driven touch pad
• 100 user-defined memory cells for storing barrel size, deposit volume, dispense rate, pause and
pullback
The Ultra 2800 Dispensing System provides consistent results, regardless of changes in fluid
volume, viscosity or temperature. It is ideal for use with 2-part epoxies and other fluids with
changing viscosities, or where a specific flow rate is needed.
First Steps
1. Unpack the dispenser.
2. For step-by-step setup instructions, see the Ultra 2800 Quick Start Guide.
3. Now is a good time to ACTIVATE your Two Year Warranty. Please follow the instructions in the
enclosed “Welcome” letter to register your warranty online. Or if you prefer, call the appropriate
toll-free number listed below, provide the serial number of your dispensing system and respond
to a few short questions.
In the USA, call 800-556-3484 between 8:30 a.m. and 5:30 p.m. Eastern time.
In Europe, call [phone].
In Asia, call [phone].
In all other areas, call your authorized EFD distributor or [phone].
Getting
Started
6