User Guide

30cc

Shot

Steps

0.0500cc

160

Program

number

Barrel

select

Hand icon

Back

Forward

Pause

Program

Function

The Ultra 2800 Dispensing System offers 100 user-defined memory programs, ranging from 0-99.

The programs store the following information.

• Syringe barrel size

• Deposit volume

• Dispense rate

• Pause

• Pullback

Follow these steps to define a program

1. Select PROGRAMMED DISPENSE mode. (Press “hand” icon so red light is off.)

2. Press prg to highlight the program number. Use the (+) or (-) buttons to assign or select the

program number.

3. Press the icon for Single Barrel Select. Set Dispense Rate from this screen by pressing F3 for

Rate, then selecting Medium.

4. Select Deposit Volume by pressing the FORWARD button. Use the (+) or (-) buttons to set

volume.

5. Select Pullback by pressing the BACK button. Use the (+) or (-) buttons to set Pullback.

6. Press the foot pedal once to return to the Home screen. The settings are automatically saved.

7. Press the foot pedal again to dispense the first deposit.