User Guide

Dispense Rate
In both PROGRAMMED DISPENSE and MANUAL mode, pressing the Turtle button allows you to
manually set the Dispense Rate. Use the (+) or (-) buttons to change the speed manually if needed.
In most cases, however, we recommend that you simply use one of the preset Dispense Rates.
• Press the Single Barrel Select button.
• Press F3 to access the Dispense Rate options.
• Select Low, Medium or High.
Dispense Rate is based on cc’s per second. For best results, use the slowest Dispense Rate practical
to your application. In general, start with the preset default rate of Medium. Slower dispense rates
give you better repeatability, since they create less fluid compression. This helps prevent oozing.
Increase and Decrease
In both PROGRAMMED DISPENSE and MANUAL mode, press the (+) or (-) button to change a
number of variables, including Program Number, Deposit Volume, Dispense Rate, Pause milliseconds,
Pullback steps and more.
When the (+) or (-) buttons are pressed briefly, the settings will adjust slowly. When the (+) or (-)
buttons are pressed and held, the settings will adjust faster.
Features &
Controls
13
Back Panel
Connect foot pedal
Power Input
On/Off
Connect I/O