Specifications
❶ Connect the air input hose to a plant air source. Set plant air supply
within 80 to 100 psi (5.5 to 6.9 bar). Where required, use an EFD
five-micron filter regulator #2000F755 (see Warranty).
❷ Attach the air input hose coupling to the dispenser. Pull back metal
ring to attach to dispenser.
❸ Plug in the polarized foot pedal connectors (A & B).
❹ Check the voltage label on the input voltage selector cartridge. To
change the voltage, remove the voltage selector from the cartridge,
rotate it and position the correct voltage to show through the
cartridge window. Replace the cartridge into the power cord
receptacle and insure that both sides snap securely into position.
Install the power cord.
Note: For the 1500DV-15 dispenser, use the test barrel filled with clear
fluid and the red 25 gage tip. Refer to "Making Timed Deposits of Watery-
thin Fluids" on page 22.
❺ Attach the 10cc barrel prefilled with blue, nontoxic test fluid
(included with the dispenser) to the 10cc adapter head.
❻ Take the 10cc adapter assembly (#5150 on the adapter head) and
insert the black, male quick-connect into the air output fitting on the
front panel and turn clockwise to lock. Place barrel in the barrel stand.
❼ During the initial testing, you will not use the barrel vacuum control.
Keep this control shut off (turned completely clockwise—do not force).
❽ Plug in the vacuum pickup pen. Select and attach a pickup pad/tip.
1500DV -- Hookup
13
1500DV
22
0
120
1
0
0
Spare Fuse
Cartridge Window
(check voltage indicated)
Note: The dispenser is
shipped with the fuse
cartridge set for 120
VAC input.
Voltage Value
Pin Function
1. Initiate +
2. Initiate
3. Output +
4. Output
5. Contact Closure
6. Chassis Ground
7. Contact Closure
8. Not Used
9. Not Used
]
]
I/O Connection
The 9 pin D connector and
internal circuitry provides
external initiate with end-of-
cycle feedback. The pin
connections are shown
below. For complete sche-
matic and detailed infor-
mation, please contact EFD.
5-24 VDC
250 mA Max
5-24 VDC
6789
12345
Note: A 9-pin male connector
assembly is available from
EFD (order part #7154).