Technical data

Rittal Modular Safe LMS 9.3 Introduction
We reserve the right to make technical changes Version 2.2
Operator Manual Page 7
NOTICE
Always keep the keys to open the safety doors in a safe place that is
inaccessible to unauthorized persons. Never keep the keys in the
Modular Safe.
NOTICE
After installing the air conditioning unit, wait at least 2 hours before
putting the equipment into operation. Start-up must only be done by
duly authorized personnel. The condensate drain that is fed through
the cable bulkhead must be functionally discharged in the building.
NOTICE
The safety doors of the Modular Safe LMS 9.3 can only be opened to a
certain limited position. Avoid forcing a wider opening of the safety
doors, as you may damage the Modular Safe.
NOTICE
The locking bolts must be retracted before you close the doors, other-
wise the Modular Safe will sustain damage.
NOTICE
Caution: Risk of the safe tipping over when the doors are opened 180°
when the housing is empty!
NOTICE
Never drill into the side elements, top or bottom elements, or the safety
doors. This can lead to damage to the insulating materials in the safe’s
walls.
Failure to comply will result in loss of warranty!