Technical data

Rittal Modular Safe LMS 9.3 Introduction
We reserve the right to make technical changes Version 2.2
Operator Manual Page 6
WARNING
Risk of people getting locked in
There is a risk of injury if people get locked in the not yet fully equip-
ped safe.
Before locking the not yet fully equipped Modular Safe, make sure that there
are no more people inside.
1.3 Safety instructions to prevent damage to the Modular Safe
NOTICE
To ensure that the safety doors function properly, the Modular Safe
must be installed on a level floor with a max. 2° deviation.
NOTICE
Do not change the location of the Modular Safe yourself and do not
dismantle it.
Contact the manufacturer or his duly authorized service company to do
these jobs.
NOTICE
Before installing the Modular Safe LMS 9.3, check the operating envi-
ronment requirements.
Do not obstruct or maladjust the air intake and outlet vents at the air
conditioning unit on the inside and the outside of the Modular Safe
LMS 9.3.
The thermal load inside the Modular Safe LMS 9.3 must never exceed
the capacity specified on the air conditioning unit rating plate.
The ambient temperature at the site of installation of the Modular Safe
must lie with temperature limits of 10 °C and 35 °C. Provide adequate
ventilation or air conditioning at the site of installation.
NOTICE
Use only genuine spare parts. Contact Rittal Customer Service for
these.